Timber sleeper retaining wall design– First, choose the place where the garden bed will be raised for amber sleeper retaining wall using a shovel to scalp high spots and garden rake to fill in the low spots. Second, ask a friend or family member to help move the sleeping timber to the construction area. The timber can weigh up to 110 kg (£ 240) each. Bend your knees and lift with your legs rather than your back. Get more than one person to move them if necessary.
Third, add the two longest timber sleeper retaining wall design parallel with each 1.3 meters (4 feet 3 inches) from each other at both ends. Fourth, lay the shorter timber in between the ends of the two longest timbers to form a rectangle. This is the garden bed. Fifth, drill two pilot holes horizontally in the outside of each of the two ends of the four longest timbers. Drill these holes three inches in from the ends of the long timber and four inches apart vertically. Drill the holes a then pull the drill out of the hole so that the chips to slip out of the drilled grooves.
Sixth, let the drill to cool in between insertion and reinsertion. Control holes will go through the pages of the long timber and into the ends of the short timber. Last, place the bolts in each of the eight pilot holes and screw the bolts through the pilot hole to the long timber and the short timbers are closely linked. Use adjustable wrench to achieve this. When finished, outside of the timber sleeper retaining wall design should be flush with the underside of each bolt head.More reader came from this term:timber retaining wall design,sleeper retaining wall,sleeper retaining wall design,sleeper wall,garden bed timber,sleeper wall design,timber for garden beds,timber sleeper retaining wall,sleeper garden beds,how to build a bed that goes on the wall